


ORIGINAL FEATURES

To prevent deformation of the frame, the base was assembled using solely L-bar members. This made the structure extremely stable, although it was time consuming to position the screws and nuts conveniently. We designed the base to be taller than the arm in case we needed to attach supports connecting to the truss to counteract twisting. After testing, our arm was steady enough that no supports were needed. Our goal was for the base to be rigid enough to resist the torsional moment.

With stability in mind, we decided a triangular truss would be the most ideal design. The arm is oriented so that one side is precisely perpendicular to the supports extending from the base. Our intention was that the motor would be simple to install and the lever would easily rotate so that the lift is exclusively vertical.

This feature has the most influence on the lift. A longer lever arm and additional weight will allow for a higher lift. However, to avoid disqualification, we had to be mindful that the arm does not touch the table and the structure does not exceed the weight limit. The hook was forged for easy fastening to the weight.

To prevent deformation of the frame, the base was assembled using solely L-bar members. This made the structure extremely stable, although it was time consuming to position the screws and nuts conveniently. We designed the base to be taller than the arm in case we needed to attach supports connecting to the truss to counteract twisting. After testing, our arm was steady enough that no supports were needed. Our goal was for the base to be rigid enough to resist the torsional moment.

ABOUT THE TEAM
Carnegie Mellon University | Mechanical Engineering '19



Obehioye Adubor
Samantha Ealy
Justin Mitchell

HAND ANALYSIS
If our assumptions hold, the crane should lift 4.96 inches, theoretically.

Assumptions:
1. Maximum torque of servo is 57 oz•in
2. Base and truss arm remain rigid
3. Weight acts perpendicular to the arm downward
4. Angle of rotation is 90°

HOW IT WORKS
Our primary goal when designing the crane was to achieve the highest lift. To do this, we needed to reduce the number of twisting moments, therefore, we created a strong 5" x 5" base reinforced with L-bar extrusions and a triangular truss arm. Secured at the end of the truss was a servo motor to rotate the lever arm that would be ultimately lifting the weight. To balance the moment, we added a 3-ounce counterweight at the opposite end of the arm.
The Mechanism


STRUCTURAL ADVANTAGES
Our design takes advantage of the difference between bending and axial stresses. A greater stress is required for a material to fail in axial loading than to fail in bending. Because of this, we knew we would want to minimize the number of parts on our crane subjected to bending stresses as opposed to supported axial related stressed. Failing to do this would cause undesirable deflections in our crane. To combat bending stresses we reinforced areas of the crane, specifically the area where the arm sits, with diagonal members that would be primarily loaded axially. We also took advantage of how the shape of the member, more specifically the L-bar, has an effect on moment of inertia. L-bars have a larger amount of material located away from the neutral axis which in turn helps resist bending stresses. By using L-bars almost exclusively on our base we were able to achieve an extremely stiff base which experienced practically no flexion when loaded.


